Kitchen & Bathroom Plumbing in Stafford, VA
Kitchens and bathrooms are where most of your home’s plumbing lives — and where all of its remodeling happens. The plumbing behind the finishes decides whether the project is a joy or a leak waiting behind new tile.
We handle it all across Stafford County — from remodel rough-in through final fixture trim, plus the everyday repairs and appliance hookups in between. Permits handled, work sequenced to your project timeline, backed by our workmanship guarantee.
Call (540) 930-8930Project plumbing — rough-in, drain relocation, venting, water & gas lines, and final fixture trim for remodels, additions, and basement bathrooms.
Repair plumbing — toilets, faucets, shower valves, sink drains, dishwasher connections, ice maker lines, disposals, and laundry hookups.
Call us for a single leaking dishwasher line or the full plumbing scope of a remodel — one number either way.
Two rooms, every job in them.
Bathroom remodel plumbing
Rough-in relocates supply lines and drains, sets the tub or shower valve, moves the toilet flange, and vents to code. Trim-out sets the toilet, mounts faucets, connects drains, and pressure-tests everything. Common jobs: tub-to-shower conversions, double vanities, freestanding tubs, and basement baths (often needing a sewage ejector pump).
Ejector pump serviceKitchen remodel plumbing
Kitchens hide more plumbing than any room but the bath: sink relocations and island sinks (running drain and vent where no wall exists — the right way, not the code-violating way), dishwasher connections with proper high loop or air gap, ice maker lines in proper tubing with an accessible shut-off, disposals, pot fillers, bar sinks, and gas range connections.
Gas line serviceLaundry & utility plumbing
Laundry relocations and additions (supply, standpipe drain, venting), utility sink installs, and washing machine hookups with quality valves. The single most common source of catastrophic laundry flooding is a burst rubber supply hose on a valve that wouldn’t close — we fix both sides of that risk.
Everyday repairs & hookups
Not remodeling — just fixing or upgrading? Toilets, vanity faucets, shower valves, disposals, and drain problems, plus dishwasher and appliance hookups. You don’t need a full remodel to call us; small kitchen and bath repairs are normal service calls.
Fixture plumbingRemodels are the best moment to fix what’s hidden.
The most expensive part of many plumbing upgrades is getting to the pipe — and your remodel already paid that bill. We flag these opportunities during rough-in with prices, not pressure. Sometimes the answer is “your pipes are fine” — you’ll hear that too.
Common kitchen & bath problems we fix.
Leaks under sinks & vanities
A small drip damages cabinet floor, subfloor, and drywall before anyone notices. We repair traps, disposal connections, supply lines, shut-offs, basket strainers, tailpieces, and dishwasher drain connections — and check for slow leaks already at work.
Shower & tub valve problems
Hot-cold-hot swings may point to a failing cartridge, a pressure-balancing issue, or an old valve that no longer protects against temperature swings. We repair cartridges when possible and set new valves at the correct depth so trim fits after tile.
Dishwasher & ice maker lines
Dishwasher leaks come from the connection, drain routing, or a missing high loop; ice maker leaks from cheap saddle valves and brittle tubing. We install accessible shut-offs, proper tubing, and secure connections so hookups don’t become hidden water-damage claims.
Drain & vent layout
When a sink moves to an island or a basement bath is added, venting matters as much as supply. A drain without proper venting gurgles, empties traps, smells, or clogs. We plan the drain and vent system before cutting.
How we work with your project.
For remodels, gather the fixture list, cabinet drawings, and appliance specs before the visit — the earlier plumbing is planned, the fewer change orders.
Your timeline is the timeline
A plumber who misses rough-in week stalls the drywall, the tile, and your patience. We schedule to your project plan and show up when the schedule says.
Permits & inspections, handled
Bathroom additions, fixture relocations, and gas work require Stafford County permits. We pull them and pass the inspections — what protects you when you sell.
Clear scope, price before work
Rough-in and trim-out quoted up front. Change orders (remodels have them) priced and approved before they’re performed.
Guaranteed
Every connection we make is backed by our workmanship guarantee — behind your new tile is exactly where you want that to be true.
The project’s supporting cast.
Remodel & repair near you.
Remodels and repairs countywide. Stafford County hub · All service areas →
Kitchen & bath plumbing questions.
Do I need a permit for a bathroom or kitchen remodel in Stafford County?
If plumbing is relocated, new drains are added, a basement bathroom is built, or gas piping is changed, a permit is commonly required. Simple like-for-like fixture replacement in the same location may not require the same process. We help you sort that out before the work begins, and the final requirement should always be verified with Stafford County.
Can you work with my general contractor?
Yes. We regularly work as the plumbing subcontractor on remodels. We coordinate rough-in, inspection timing, trim-out, fixture delivery, and change orders so plumbing does not hold up drywall, tile, cabinets, or countertops.
Can you help if I am managing the remodel myself?
Yes. Homeowners often call us before demolition, during rough-in planning, or after discovering old pipe inside an open wall. We can explain what needs to happen, what must be done before walls close, and what should wait until fixtures arrive.
How much does bathroom remodel plumbing cost?
It depends on how much changes. A same-location fixture refresh costs much less than moving a toilet, adding a shower drain, or building a basement bathroom with a sewage ejector pump. We give a clear scope and price after seeing the layout and fixture plan.
Can you add a bathroom in my basement?
Often, yes. Basement bathrooms usually need careful drain planning, venting, and sometimes a sewage ejector pump because the fixtures sit below the main sewer line. We inspect the layout and explain what is realistic before the project starts.
Can you move my kitchen sink to an island?
Yes, but it should be planned early. An island sink needs proper drain, vent, and supply routing with no wall directly behind it. It is routine plumbing when planned during rough-in, and difficult when cabinets and flooring are already finished.
Do you install dishwashers and refrigerator ice maker lines?
Yes. We install dishwasher supply and drain connections, high loops or air gaps where required, refrigerator ice maker lines, accessible shut-off valves, and leak-resistant tubing. We avoid shortcut saddle valves that can cause future leaks.
Do you install customer-supplied fixtures?
Yes. We can install faucets, toilets, sinks, disposals, shower trim, and other fixtures you purchased. We will check compatibility before installation and let you know if a part, valve, supply line, or drain assembly is missing.
Should I replace old pipes while the walls are open?
If the open wall exposes galvanized, polybutylene, badly corroded copper, or old stop valves, it is worth discussing. Remodel access lowers the labor cost of replacing vulnerable pipe. If the piping is still in good condition, we will say that too.
What is the difference between rough-in and trim-out?
Rough-in is the behind-the-wall plumbing: supply lines, drains, venting, shower valves, toilet flanges, and appliance lines. Trim-out happens after surfaces are finished: faucets, toilets, sinks, shower trim, disposals, and final connections.